NVIDIA/Mellanox MMS4X00-NM- FLT Compatible 800G OSFP 2xDR4/DR8 1310nm 500m PAM4 DOM Two MPO-12/APC SMF Transceiver Module (Flat Top) for ConnectX-8 C8180 SuperNIC

#102870
Model: OSFP-800G-2DR4F | SKU: 980-9I301-00NM00
Sold: 338
In Stock: 795
US$

Item Spotlights

  • Maximum Power Consumption ≤16.5W.
  • Provide Professional Compatibility and Parameter Test Reports.
  • Compliant with Hot Pluggable OSFP MSA Standard.
  • Compliant with RoHS Environmental Standard (Lead-free).
  • DDM(Digital Diagnostic Monitoring) Supported.
  • Pairing with the C8180 Super NIC enables quad-Plane topology networking and effectively improves link stability.
  • 30-Day Free Return, 1-Year Free Replacement, 3-Year Warranty, Lifetime After-sales Technical Support.
800G OSFP DR8 500m SMF Module for NVIDIA/Mellanox (Flat Top)
NVIDIA/Mellanox MMS4X00-NM- FLT Compatible 800G OSFP 2xDR4/DR8 1310nm 500m PAM4 DOM Two MPO-12/APC SMF Transceiver Module (Flat Top) for ConnectX-8 C8180 SuperNIC
Specifications
Applications
Product Highlights
Questions & Answers
Resources
Specifications
Applications
Product Highlights
Questions & Answers
Resources

Description

NVIDIA/Mellanox Compatible 800G 2xDR4/DR8 Optical Transceiver Module for ConnectX-8 C8180 SuperNIC (Twin-port OSFP, 1310nm, 500m, Two MPO-12/APC, DOM, for SMF, Flat Top)

NADDOD NVIDIA/Mellanox MMS4X00-NM- FLT compatible OSFP-800G-2xDR4F optical transceiver is designed for 800Gb/s Ethernet interconnects, using a twin-port OSFP architecture to support 2×400Gb/s DR4/DR8 single-mode transmission over an 8-channel parallel optical interface. The module operates via two MPO-12/APC connectors, with each connector carrying four optical lanes, and applies 100G-PAM4 modulation to enable data center–reach links of up to 500 meters over single-mode fiber. The module is compatible with NVIDIA ConnectX-8 C8180 SuperNIC, delivering stable, high-speed optical connectivity.

By adopting a parallel DR4/DR8 design optimized for short-to-medium reach connectivity, the OSFP-800G-2xDR4F enables high port density and efficient bandwidth scaling in 800G switching systems. Finned-top OSFP shells are supported to meet the additional cooling requirements of 800G OSFP switches, while a flat-top variant is available for ConnectX-8 system links, providing flexibility across different deployment platforms.

Specifications

Form Factor
Twin-port OSFP
Distance
500m
Wavelength
1310nm
Connector
Two MPO-12/APC
Power Consumption
≤16.5W
Transmitter
EML
Receiver
PIN
Media
SMF
Modulation(electrical)
8x106.25Gb/s PAM4
Modulation(Optical)
Two ports 4x106.25Gb/s PAM4
Case Temperature(℃)
0 to 70°C (32 to 158°F)
Protocol
800G Ethernet Compliant

Applications

Product Highlights

ConnectX-8 Multi-Plane Architecture Unlocks Extreme Cluster Performance

The OSFP-800G-2DR4F module is tightly integrated with the C8180 SuperNIC’s multi-plane architecture, delivering key advantages in large-scale computing clusters. By distributing traffic across multiple planes, it maximizes bandwidth, enables smoother load balancing, and ensures consistently low latency. Each plane is isolated and inherently redundant, so a single path failure does not impact service continuity, enhancing overall reliability. With higher resource utilization and fewer congestion points, the ConnectX-8 architecture enables faster scaling and a more efficient, stable, and resilient network experience.

The Cost-Efficient, High-Performance C8180 SuperNIC Solution

In ConnectX-8 NIC and Spectrum-4 switch AI cluster architectures, the C8180 paired with OSFP-800G-2DR4F reduces optical module count by 20% compared with the C8240 using Q112-400G-DR4 solution. This delivers the following three key advantages.

Questions & Answers

Ask a Question
Q:
What is the difference between Flat top and Finned-top OSFP 800G 2xDR4 optical modules?
A:
The "Flat Top" 800G OSFP module is mainly used in the ConnectX-8 NIC, which have internal heat sinks mounted on top of the cages. The "Finned Top" optical module form factor utilizes a module top design with heat sink fins to increase heat dissipation and improve module performance and reliability in high-temperature environments, and is typically used in air-cooled switches for additional cooling due to the reduced airflow inlet in the switch.
Q:
What kind of optical fiber do I need to use with the 800G Twin-Port NDR 2xDR4 optical module?
A:
When the connection rate of both devices is 2x400G-2x400G, it is paired with two OS2 MPO-12/APC patch cords, and the corresponding NADDOD model is S2MPOA12FB.

Quality Certification

ISO140012015
ISO 90012015
ISO450012018
FDA
FCC
CE
RoHS
TUV-Mark
UL
WEEE

What We Supply