Generic Compatible 800G OSFP 2xDR4/DR8 1310nm 500m PAM4 DDM Dual MPO/MTP-12 SMF Linear-drive Pluggable Optics (LPO) Transceiver

#102507
Model: OSFP-800LPO-2DR4
Sold: 11
In Stock: Available
US$

Item Spotlights

  • Low power consumption ≤8W.
  • Remove DSP and use linear direct drive to reduce delay and improve transmission efficiency.
  • Compliant with Hot Pluggable OSFP MSA Rev5.0, IEEE802.3df Standard.
  • Class1/1M Standard Product, Compliant with RoHS Environmental Protection Standards (Lead-Free).
  • DDM(Digital Diagnostic Monitoring) Supported.
  • 30-Day Free Return, 1-Year Free Replacement, 3-Year Warranty, Lifetime After-sales Technical Support.
800GBASE-2xDR4/DR8 OSFP PAM4 1310nm 500m SMF LPO Module for Generic
Generic Compatible 800G OSFP 2xDR4/DR8 1310nm 500m PAM4 DDM Dual MPO/MTP-12 SMF Linear-drive Pluggable Optics (LPO) Transceiver
Specifications
Applications
Product Highlights
Questions & Answers
Resources
Specifications
Applications
Product Highlights
Questions & Answers
Resources

Description

Generic Compatible OSFP-800LPO-2DR4 OSFP PAM4 Linear-drive Pluggable Optics (LPO) Transceiver, Support 800GBASE-DR8 (SMF, 1310nm, 500m, Dual MTP/MPO-12 APC, DDM)

NADDOD OSFP-800LPO-2DR4 is a cost-effective module with high performance, which is optimized for AI Datacenter, supporting datarate of 8x112Gb/s PAM4 Optical interface and 8x112Gb/s PAM4 Electrical interface. Its transmission distance is up to 500m on single mode fibers. It replaces a retimed DSP data path with a linear data path, thus realizing lower power consumption and latency. It has been designed to withstand the maximum range of external operating conditions including temperature, humidity and EMI. The module offers very high functionality and feature integration, accessible via a two-wire serial interface. The transmitter driver AGC can be enabled or disabled, to increase dynamic range.

Specifications

Form Factor
Twin-port OSFP
Distance
500m
Wavelength
1310nm
Connector
Dual MTP/MPO-12 APC
Power Consumption
≤8W
Transmitter
DFB
Receiver
PIN
Media
SMF
Modulation(electrical)
8x106.25Gb/s PAM4
Modulation(Optical)
8x106.25Gb/s PAM4
Case Temperature(℃)
0 to 70°C (32 to 158°F)
Protocol
800G Ethernet Compliant

Applications

Product Highlights

DSP-Free 800G LPO Optics for Efficient AI Interconnect

OSFP-800LPO-2DR4 adopts a DSP-free linear architecture, reducing power consumption by approximately 50% (8W vs. 16W) compared with conventional 800G retimed optics. This simplified design reduces transmission latency and improves link efficiency, while also optimizing TCO through reduced cooling, power consumption, and infrastructure requirements. Designed for large-scale AI training clusters, it offers broad compatibility with mainstream RoCE devices for stable and efficient deployment.

Validated on Arista DCS-7060X6-64PE with Ultra-Low BER

Tested on the Arista DCS-7060X6-64PE switch with all lanes in stable link-up status, achieving a pre-FEC bit error rate of 2.28E-13, demonstrating excellent signal integrity and reliable 800G transmission performance.

Questions & Answers

Ask a Question
Q:
What is the main difference between DSP transceivers and LPO transceivers?
A:
DSP optical components use digital signal processing for error correction and equalization, whereas LPO transceivers rely on the host ASIC’s SerDes to handle these tasks, thereby eliminating the need for a DSP and reducing power consumption and latency.
Q:
Compared to DSP optical components, how much power can LPO save?
A:
LPO can reduce power consumption by 40–50%, saving several watts per module, which offers significant scalability in hyperscale environments.
Q:
Is the LPO module compatible with any switch that supports OSFP 800G?
A:
Compatibility depends on the host ASIC’s specifications (CMIS support, channel mapping, and trunking behavior). Be sure to confirm this with the switch vendor and conduct laboratory interoperability testing.
View More

Quality Certification

ISO140012015
ISO 90012015
ISO450012018
FDA
FCC
CE
RoHS
TUV-Mark
UL
WEEE

What We Supply