200G QSFP56 InfiniBand HDR to 2xQSFP56 HDR100 Breakout AOC - NADDOD Blog

200G QSFP56 InfiniBand HDR to 2xQSFP56 HDR100 Breakout AOC

NADDOD Abel InfiniBand Expert Feb 1, 2023

Features

  • Supports IBTA InfiniBand HDR
  • 200Gb/s HDR to 2x100Gb/s HDR100 data rate
  • 4x 50Gb/s PAM4 modulation
  • Programmable Rx output amplitude and pre-emphasis
  • SFF-8665 compliant QSFP56 port
  • Single 3.3V power supply
  • 4.35W power dissipation (typ., 200G end)
  • Bit Error Rate (BER) 1E-15 with InfiniBand systems
  • Up to 100m length
  • 0 to 70°C case temperature operating range
  • Hot pluggable
  • RoHS compliant
  • SFF-8636 compliant I2C management interface

Description

Q2Q56-200G-AOCH is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser), costeffective 200Gb/s to 2 x 100Gb/s active optical splitter cable (AOC) designed for use in 200Gb/s InfiniBand HDR (High Data Rate) systems.

The Q2Q56-200G-AOCH cable is compliant with SFF-8665 for the QSFP56 pluggable solution. It provides connectivity between system units with a 200Gb/s connector on one side and two separate 100Gb/s connectors on the other side, such as a switch and two servers. The cable connects data signals from each of the 4 MMF (Multi Mode Fiber) pairs on the single QSFP56 end to the dual pair of each of the QSFP56 multi-port ends. Each QSFP56 end of the cable comprises an EEPROM providing product and status monitoring information, which can be read by the host system.Rigorous production testing ensures the best out-of-the-box installation experience, performance and durability.

NADDOD’s unique quality active fiber cable solutions provide power-efficient connectivity for data center interconnects. They enable higher port bandwidth, density and configurability at a low cost, and reduced power requirement in the data centers.

Absolute Maximum Ratings

Table1-Absolute Maximum Ratings

Parameter Symbols Min. Typical Max. Unit Notes
Supply Voltage Vcc3 -0.3 - +3.6 V
Storage Temperature Ts -40 - +85 ºC
Operating Humidity RH +5 - 85 % 1
Data input voltage Vcc -0.3 - 3.465 V
Control input voltage Vcc -0.3 4.0 V

Note:
[1]No condensation

Recommended Operating Conditions

Table2-Recommended Operating Conditions

Parameter Min. Typical Max. Unit Notes
Operating Case Temperature 0 - +70 ºC
Power Supply Voltage 3.14 3.3 3.47 V
Power dissipation(200G re-timing on all lanes) - 4.35 4.55 W 200G end
Power dissipation(100G re-timing on all lanes) - 2.5 2.75 W 100G end
Supply noise tolerance (10Hz-10MHz) 66 mVpp
Operating relative humidity 5 85 %

Mechanical

Mechanical Diagram

Figure 1 Mechanical Diagram
Mechanical Diagram of Cable1
Mechanical Diagram of Cable2

Figure 2 Mechanical Diagram of Cable

Regulatory Compliance

Table3-Regulatory Compliance

Parameter value Units
Diameter 3±0.2 mm
Minimum bend radius 30 mm
Length tolerance 1 m ≤ length < 5 m:     +300mm / -0 m,mm
Length tolerance 5 m ≤length <50 m:    +500mm / -0 m,mm
Length tolerance Length ≥ 50 m          +1000mm / -0 m,mm
Cable color Aqua Aqua

Part Numbers and Descriptions

Table4-Part Numbers and Descriptions

Part Number Description
Q2Q56-200G-A3H Active fiber splitter cable, IB HDR, 200Gb/s to 2x100Gb/s, QSFP56 to 2xQSFP56, LSZH, 3m
Q2Q56-200G-A5H Active fiber splitter cable, IB HDR, 200Gb/s to 2x100Gb/s, QSFP56 to 2xQSFP56, LSZH, 5m
Q2Q56-200G-A10H Active fiber splitter cable, IB HDR, 200Gb/s to 2x100Gb/s, QSFP56 to 2xQSFP56, LSZH, 10m
Q2Q56-200G-A15H Active fiber splitter cable, IB HDR, 200Gb/s to 2x100Gb/s, QSFP56 to 2xQSFP56, LSZH, 15m
Q2Q56-200G-A20H Active fiber splitter cable, IB HDR, 200Gb/s to 2x100Gb/s, QSFP56 to 2xQSFP56, LSZH, 20m
Q2Q56-200G-A30H Active fiber splitter cable, IB HDR, 200Gb/s to 2x100Gb/s, QSFP56 to 2xQSFP56, LSZH, 30m

Warnings

Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.



Related Resources:
Datasheet: 200G QSFP56 InfiniBand HDR to 2xQSFP56 HDR100 Breakout AOC
NADDOD 200G InfiniBand HDR AOC vs OEM
200G HDR Optics Products Application Scenarios
NADDOD 200G InfiniBand Cable Products Introduction
NADDOD 200G InfiniBand Optical Transceiver Products Introduction