10G RJ45 Switch Manageable 48 Port | Layer 3 Switch 48 Port - NADDOD

S3600-48S4X, 48-Port Gigabit Ethernet L3 Switch, 48x 1Gb SFP, with 4x 1/10Gb SFP+, Support Stacking

#10003
#10003
Modèle: S3600-48S4X
  Vendu:  32
Disponible
request-free-sample
Request Sample

Articles en vedette

  • 48x 1G SFP, 4x 10G SFP+ with an expanded 4x 10G SFP+
  • Support VXLAN improving the network architecture scalability and flexibility
  • Support M-LAG+VARP, replace the original STP protocols
  • Ethernet PFC/ECN is supported to build an end-to-end lossless network
  • 1+1 hot-swappable smart fan, 1+1 pluggable power supply
  • Support overcurrent, overvoltage, and overheat protection
  • Support Private/Voice/Guest VLAN, QinQ, STP/RSTP/MSTP, L2 multicast, Smartlink, LACP, QOS
S3600-48S4X, 48x Gigabit RJ45, Managed Enterprise Switch
S3600-48S4X, 48-Port Gigabit Ethernet L3 Switch, 48x 1Gb SFP, with 4x 1/10Gb SFP+, Support Stacking
Caractéristiques
Applications
Points forts du produit
questions et réponses
Avis des clients
Ressources
Caractéristiques
Applications
Points forts du produit
questions et réponses
Avis des clients
Ressources
Description

S3600-48S4X, 48-port Ethernet L3 Switch, 48x 1GbE SFP, with 4x 1/10GbE SFP+ and 1 slot expansion slot (4x10GbE SFP+ interface cards), 2.4/24TGbps switch capacity, 513/705Mpps forwarding rate, supporting VXLAN, M-LAG+VARP

S3600-48S4X L3 switch provides 48x 1GbE SFP, with 4x 1/10GbE SFP+ ports and 1 slot expansion slot for flexible 4x10GbE SFP+ interface cards for different network requirements. Offering the flexibility to support mixed 1Gb and 10Gb environments, this managed switch provides 256Gbps switching capacity with rich L2 and L3 layer capabilities.

Caractéristiques
Ports
48x 10/100/1000BASE-T RJ45 | 4x 1G/10G SFP+
Switch Chip
Marvell
CPU
Armv7, 800M/800MHz
DHCP Server
Support
Switching capacity
598Gbps
MAC address
16K
Forwarding Rate
166Mpps
Jumbo Frame
9600
SDRAM/DRAM/RAM
512MB
Number of VLANs
4094
Flash Memory
128M
Unicast MAC address
16384
PoE Standard
IEEE 802.3af/at
Multicast MAC address
2048
Power Supply
2 (1+1 Redundancy) Hot-swappable
ARP Capacity
1022
Input Voltage
100~240VAC, 50Hz/60Hz
Software Update
TFTP/FTP
Hot-swappable Fans
2(1+1 Redundancy )
System Restart
<120s
POE Max. Power Consumption
1440W
MTBF
>200K Hours
Dimensions(HxWxD)
1.72"x17.32"x18.11"(43.6 X 440 X 460mm)
Warranty
3 Years(30-Day Return)
Solutions de connectivité
Applications
no data
Points forts du produit
Flexible Ports for Different Scenarios

48x 1G SFP and 4x 1/10G SFP+ ports with one slot expansion slot for flexible 4x 10G SFP+ interface cards to achieve different network demands.

Multi-Chassis Link Aggregation - MLAG

MLAG forms two switch devices into an MLAG dual-active system to synchronize information and increase link reliability to the devices, No wasted bandwidth with uplinks in Spanning Tree Blocking state,which can effectively isolate the LAN, securing data and improving the efficiency of the switch.

1+1 hot-swappable power supply and 1+1 smart fan

1+1 power supply redundancy and 1+1 intelligent fans with automatic speed adjustment, support for over-current, over-voltage and over-heat protection, and non-intermittent power supply for terminal equipment greatly improve the stability of the network.

Comparer les articles
S3600-48S4X

S3600-48S4X

S3600-24T24S4X

S3600-24T24S4X

S4600-24X2C

S4600-24X2C

Description
S3600-48S4X, 48-Port Gigabit Ethernet L3 Switch, 48x 1Gb SFP, with 4x 1/10Gb SFP+, Support Stacking
S3600-24T24S4X, 48-Port Gigabit Ethernet L3 Switch, 24x 1GBASE-T, 24x 1Gb SFP, with 4x 1/10Gb SFP+, Support Stacking
S4600-24X2C , 24-Port Ethernet L3 Switch, 24x 1/10Gb SFP, with 2x QSFP28/QSFP+ Uplinks, Support Stacking
RJ45 Ports
-
24x 10/100/1000MBase-T
-
SFP Ports
48x 1G SPF | 4x 10G SPF+
24x 1G SPF | 4x 10G SPF+
24x 1G/10G SFP+ | 2x 40/100G QSFP28
Expansion Slot
1
2
2
Extended Line Card
4x 10GE SFP+
4x 10GE SFP+
1x 40GE QSFP+
1x 40GE QSFP+
Management Layer
L3
L3
L3
VXLAN
MLAG
BGP+EVPN
DHCP Server
Stacking
VRRP
QoS, Smartlink, STP, LACP, VRAP, VRRP, L2/L3 Multicast, IPv4/IPv6 bilateral, RIPv1/2/ng, OSPFv2/v3, BGP, ECMP, PBR, VRF, BFD For static, OSPF, and VRRP etc.
questions et réponses
Poser une question
Q:
What is the maximum stacking units supported by S3600-48S4X 48 port Ehernet switch?
A:
The S3600-48S4X 1G 48 port SFP switch supports a maximum of nine stacking units, which are usually stacked using two to four devices.
Q:
Does this 48 port 1G SFP Ethernet switch have the redundant power or fans?
A:
NADDOD S3600 series switches provide device-level reliability protection, including a pluggable power supply and fan to improve hardware reliability. It supports modular dual power supplies and dual fan modules, power modules, and fan modules can be hot-swappable without affecting the normal running of the device.
Q:
How can I realize the redundant config of this 1G SFP Layer 3 switch?
A:
NADDOD S3600 series switches support intelligent virtualization technology, which enables link aggregation among multiple devices through M-LAG (cross-device link aggregation), thus providing device-level link assurance and forming a dual-active system with strong advantages in scalability, reliability, overall architecture, and availability.
Voir plus
Avis des clients
Certification de qualité
ISO140012015
ISO 90012015
ISO450012018
FDA
FCC
CE
RoHS
TUV-Mark
UL
WEEE
ISO140012015
ISO 90012015
ISO450012018
FDA
FCC
CE
RoHS
TUV-Mark
UL
WEEE
Ce que nous fournissons