S4600-24X2C , 24-Port Ethernet L3 Switch, 24x 1/10Gb SFP, with 2x QSFP28/QSFP+ Uplinks, Support MLAG

#18878
モデル: S4600-24X2C
売却: 3
在庫あり: 利用可能
$ 1399.00

アイテムスポットライト

  • 24x 1000M/1G adaptive SFP+, 2x 40G/100G QSFP28 adaptive SFP+
  • Support VXLAN improving the network architecture scalability and flexibility
  • Support M-LAG+VARP, replace the original STP protoco
  • Ethernet PFC/ECN are supported to build an end-to-end lossless network
  • 1+1 hot-swappable smart fan, 1+1 pluggable power supply
  • Support overcurrent, overvoltage, and overheat protection
  • Support Private/Voice/Guest VLAN, QinQ, STP/RSTP/MSTP, L2 multicast, Smartlink, LACP, QOS
S4600-24X2C, 24x 1/10Gb SFP, Managed Enterprise Switch
S4600-24X2C , 24-Port Ethernet L3 Switch, 24x 1/10Gb SFP, with 2x QSFP28/QSFP+ Uplinks, Support MLAG
仕様
Applications
製品のハイライト
質問と回答
カスタマーレビュー
資力
仕様
Applications
製品のハイライト
質問と回答
カスタマーレビュー
資力
仕様
Ports
24x 1G/10G SFP+ | 2x 40G/100G QSFP28
Packet buffer
9M
CPU
SOC(dual-core, ARM A53)
VXLAN
Support
Switching capacity
2.56Tbps
MLAG
Support
Forwarding Rate
1260Mpps
DHCP Server
Support
SDRAM/DRAM/RAM
1GB
Jumbo Frame
9600
Flash Memory
4GB(eMMC)
Number of VLANs
4094
Power Supply
2 (1+1 Redundancy)
Unicast MAC address
81920
Fans Number
2(1+1 Smart Fans)
Multicast MAC address
2048
Typical/Max. Power Consumption
80W/100W
ARP Capacity
12287
Input Voltage
100~240VAC, 50Hz/60Hz
Software Update
TFTP/FTP
Voltage Overvoltage Protection Class
4KV
System Restart
<60s
Operating Temperature
0 to 45 ℃
MTBF
>100K Hours
Dimensions(HxWxD)
1.73"x17.32"x14.17"(44X440X360mm)
Warranty
3 Years(30-Day Return)
Applications
no data
製品のハイライト
24x 1G/10G SFP+ adaptive optical ports, 2x 40G/100G QSFP28 adaptive ports, supporting VXLAN, M-LAG+VARP

Offers large switching capacity, high-density 10G/40G wire-speed forwarding ports, and extensive Layer 3 functionality

1+1 hot-swappable power supply and 1+1 smart fan

1+1 power supply redundancy and 1+1 intelligent fans with automatic speed adjustment, support for over-current, over-voltage and over-heat protection, and non-intermittent power supply for terminal equipment greatly improve the stability of the network.

Multi-Chassis Link Aggregation - MLAG

MLAG forms two switch devices into an MLAG dual-active system to synchronize information and increase link reliability to the devices, No wasted bandwidth with uplink in Spanning Tree Blocking state,which can effectively isolate the LAN, securing data and improving the efficiency of the switch.

アイテムを比較
S4600-24X2C

S4600-24X2C

S3600-24T24S4X

S3600-24T24S4X

S3600-48S4X

S3600-48S4X

Description
S4600-24X2C , 24-Port Ethernet L3 Switch, 24x 1/10Gb SFP, with 2x QSFP28/QSFP+ Uplinks, Support Mlag
S3600-24T24S4X, 48-Port Gigabit Ethernet L3 Switch, 24x 1GBASE-T, 24x 1Gb SFP, with 4x 1/10Gb SFP+, Support Mlag
S3600-48S4X, 48-Port Gigabit Ethernet L3 Switch, 48x 1Gb SFP, with 4x 1/10Gb SFP+, Support Mlag
RJ45 Ports
-
24x 10/100/1000MBase-T
-
SFP Ports
24x 1G/10G SFP+ | 2x 40/100G QSFP28
24x 1G SPF | 4x 10G SPF+
48x 1G SPF | 4x 10G SPF+
Expansion Slot
2
2
1
Extended Line Card
1x 40GE QSFP+
4x 10GE SFP+
1x 40GE QSFP+
4x 10GE SFP+
Management Layer
L3
L3
L3
VXLAN
MLAG
BGP+EVPN
DHCP Server
VRRP
QoS, Smartlink, STP, LACP, VRAP, VRRP, L2/L3 Multicast, IPv4/IPv6 bilateral, RIPv1/2/ng, OSPFv2/v3, BGP, ECMP, PBR, VRF, BFD For static, OSPF, and VRRP etc.
質問と回答
質問する
Q:
Can the S4600-24X2C be upgraded or a license added to support advanced features such as VXLAN/EVPN?
A:
The S4600-24X2C 24 port 10GbE PoE switch supports online BootROM upgrade. After the upgrade is complete, restart takes effect. The S4600-24x2C Fiber Switch supports the centralized gateway and distributed gateway deployment modes. By encapsulating Layer 2 packets in UDP tunnel packets, the S4600-24x2C provides the same large Layer 2 network as the VLAN. It solves the problem that the number of vlans in the traditional data center network is insufficient and the scale is difficult to expand. It also supports the BGP-EVPN protocol to dynamically establish VXLAN tunnels.
Q:
Does the switch management platform offer link and traffic monitoring?
A:
The device S4600-24X2C switch with two 100Gb uplink supports Console, Telnet, SSH, and other basic terminal services, as well as RMON, s-Flow, SNMP v1/v2c/v3, etc.
Q:
Hi, we want to buy an S4600-24X2C switch to replace our Cisco core switch. Can we use our SFP+ Cisco transceivers or do we need to buy new ones?
A:
The S4600-24X2C switch does not require high compatibility for connecting products. Cisco SFP+ transceivers can be used with the S4600-24X2C 10Gb network switch.
もっと見る
カスタマーレビュー
品質認証
ISO140012015
ISO 90012015
ISO450012018
FDA
FCC
CE
RoHS
TUV-Mark
UL
WEEE
私たちが提供するもの
人気商品