20m (66ft) MPO-16 APC(Female) to 2xMPO-8 UPC(Female) Multimode (OM4) Breakout Cable, Type B, LSZH, 3.0mm, Max IL ≤ 0.35dB, Magenta

Patch cord connectors can be either female or male, referring to the gender type of the connector. Male connectors have pins, while female connectors do not. When connecting two cables using an adapter, they must have opposite genders (one male and one female). When connecting with a module, a female connector is typically used.

APC connectors have an 8-degree angled end face, which significantly reduces back reflections, minimizing signal distortion and improving transmission performance. They are commonly used in single-mode fiber links or with APC interface multimode modules for high-speed applications. UPC connectors have a flat end face angle and offer lower return loss compared to APC. They are commonly used in multimode fiber links.

These four types of patch cords are all multimode fiber patch cords. OM2 has the lowest transmission rate and distance. OM3 offers improved transmission rates and distances and is commonly used for 10G/25G low-speed links. OM4 and OM5 fibers support longer transmission distances and are typically used for 40G/100G and higher-speed links, such as 200G/400G/800G.

When using patch cords, ensure that they are compatible with the module and connector types. Avoid excessive bending or pulling. Regularly clean the patch cord end faces to prevent contamination and maintain signal transmission quality.

Yes, customized patch cords can be provided to meet specific requirements, such as cable sequence, outer jacket material, and length.